ISO CCC 3 Axles 40T Drop Side Wall Cargo Semi Trailer Flatbed Lorry Trailer
Description
Overall dimension (L*W*H):
12700mm length*2650MM Width*2700Height
detail according to the drawing
Payload: 40 Tons
Color: According to your requirement
Side wall: 600mm height
Upper and down wing plates: 10/12mm,width146mm
Main beam height: 500mm/ webplate:5mm
Side beam: 14# channel steel
Platform plate : 2mm
Cross beam: W-Shaped Throughout Beam
Axle: 3 pieces/13 Ton FUWA
Tyre: 12 Pieces/12R22.5-16PR
Rim: 12 piece/ 9.0*22.5
Leaf spring:
6 Pieces/ 90width*10pieces*12mm thickness
Suspension:
3 Set/ The high quality Q345 steel
Electrical system:
1Set/ 24 volt electrical system.
7 pin electrical connector.
parking stop, reverse, number plate and indicator lights. rear lights conform to European standard, rear front and side reflectors
Relay valve: 1/ Whole vehicle, WABCO brand
Landing gear: 1 Pair/ 8T Single action
Kingpin: 1 Piece/ JOST 50# bolting type
Tie-in: 2 Pieces/ Haldex
Chamber:
2 Pieces/ Stored chamber 2 units T30/30
Spare Tyre carrier: 2 Pieces/ Standard
Braking system:
2 line air braking system with air tank ,emergency relay valve, braking chambers and mechanical slack adjusters.
Reflectors:
Red triangle reflectors at the rear of the trailer and on side
twist locks: 8 Pieces / it can load 1*40',2*20' or 1*20' containers for option
Shotblasting and paint:
Chassis is completely shot blasted to SA 2.5 grade,and painted with first layer of international Zinc Epoxy primer(30 Microns DEF),second layer international high built polyurethane under coat(40 microns DFT), THIRD AND FORTH LAYERS INTERNATIONAL alkyd FINISH TOP coat. Total 80-100 microns. Seawater proofed
Specifications
| Item number |
ZCZ9400HJB |
Batch |
253 |
|
| Trade Mark |
CHHGC |
Product name |
Semi-trailer with side wall |
| Rated Weight |
33000 |
Total Weight |
39950 |
| Curb Weight |
6950 |
Fuel Type |
|
| Emission standard |
|
Number of the Axles |
3 |
| Wheelbase |
6830+1310+1310,6530+1310+1310 |
Axle load |
-/24000(three axles intalled side by side), |
| -/23950(three axles intalled side by side) |
| The spring number |
-/10/10/10,-/7/7/7,-/4/4/4 |
Tyre Number |
12 |
| Tyre Size |
11.00R20 12PR,11.00-20 12PR,12R22.5 12PR |
Approach/Departure Angle |
-/14 |
| Front/Rear overhang(mm) |
-/2450 |
Front tread |
- |
| Rear wheel base |
1840/1840/1840,1820/1820/1820,1850/1850/1850 |
|
|
| The overall length |
13000 |
The overall width |
2500 |
| The overall Height |
2750 |
The van length |
12740 |
| The van width |
233,023,002,400 |
The van height |
600 |
| Max payload of the saddle |
1,595,016,000 |
The company |
CHHGC |
Basic Configuration table of FIVE Typical products |
| Type |
Ultra-Light Type |
Light Type |
Standard Type |
Heavy Type |
Ultra-Heavy Type |
| Ovall dimensions(m)(L*w*h) |
13*2.5*0.6 |
13*2.5*0.6 |
13*2.5*0.6 |
13*2.5*0.6 |
13*2.5*0.6 |
| Height of longitudinal beam |
500 |
500 |
500 |
500 |
500 |
| Specification of upper/lower wing plates |
10/12 |
12/14 |
14/16 |
16/16 |
16/20 |
| Longitudinal beam web |
T5 |
T6 |
T6 |
T8 |
T10 |
| Specification of side beam |
14# profile steel |
14# profile steel |
16# channel steel |
16# channel steel |
16# channel steel |
| Thickness of baseplate |
T2 |
T2 |
T3 |
T3 |
T4 |
| Specification of throughout beam |
W-shaped throughout beam |
W-shaped throughout beam |
Rectangular tube 80*40 |
Rectangular tube 80*40 |
10# channel steel |
| Spacing of throughout beam |
Approximate 650 |
Approximate 650 |
Approximate 650 |
Approximate 650 |
Approximate 650 |
| Type of body panel |
small vertical |
small vertical |
small vertical |
large vertical |
large vertical |
| Width of pillars |
180 |
180 |
180 |
220 |
220 |
| Specification and number of toolkit |
one 1.5 toolkit |
one 1.5 toolkit |
one 2.5 toolkit |
one 2.5 toolkit |
one 2.5 toolkit |
| Specification of leaf spring |
4-plate |
10-plate type II |
10-plate type II |
12-plate type I |
12-plate type II |
| Specification of traction pin |
50# |
50# |
90# |
90# |
90# |
| Support leg |
8-tonnage single-acting |
8-tonnage single-acting |
28-tonnage single-acting |
28-tonnage single-acting |
28-tonnage single-acting |
| Diameter of balance arm pin |
50mm |
50mm |
50mm |
50mm |
75mm |
| Uniform bearing Ton |
Below 40T(must give clear indication in the contract) |
Below 50T(can dont give indication in the contract) |
Below 60T(can dont give indication in the contract) |
Below 70T(can dont give indication in the contract) |
Below 80T(can dont give indication in the contract) |
| Curb weight |
Approximate 6.4 Tons |
Approximate 6.6 Tons |
Approximate 8.0 Tons |
Approximate 8.5 Tons |
Approximate 9.8 Tons |
*
The main components of the warranty period
| ITEM NAME |
WARRANTY |
ITEM NAME |
WARRANTY |
| MAIN FRAME |
FRAME |
1 YEAR |
RUNNING GEAR |
AXLE |
6 MONTHS |
| SUSPENSION |
6 MONTHS |
AXLE BEARING |
3 MONTHS |
| KING PIN |
1 YEAR |
WHEEL HUB |
3 MONTHS |
| BALANCE ARM |
3 MONTHS |
TIRE |
6 MONTHS |
| ITEM NAME |
WARRANTY |
ITEM NAME |
WARRANTY |
| BRAKING DEVICE |
BRAKE DRUM |
3 MONTHS |
SUPPORT DEVICE |
LANDING GEAR |
6 MONTHS |
| BRKE CHAMBER |
3 MONTHS |
SPARE WHEEL CARRIER |
6 MONTHS |
| AIR RESERVOIR |
6 MONTHS |
| ITEM NAME |
WARRANTY |
| OTHERS |
LEAF SPRING |
3 MONTHS |
| BRAKE CHAMBER DIAPHRAGM |
3 MONTHS |
| EMERGENCY RELAY VALVE |
3 MONTHS |
| BRAKE SHOE |
3 MONTHS |
| RELAY VALVE |
3 MONTHS |
Our Products
Packaging & Delivery
Packaging Details: |
N/M,in nude, or make the packaging according to custom's requiryment. |
| Delivery Detail: |
within 15 workdays after receipt the L/C or deposit |
Workshop
FAQ
1. Can i have samples of this type of trailer to test the quality?
Yes, you can buy any samples to test the quality,our MOQ is 1 set.
2. What's the delivery time and can you lower the price?
It depends on your order. The delivery time is within 15 workdays after we received your prepayment. If you have place an order of large quantities, then ,of course, the price can be lowered.
3. Can i customize the painting and the logo?
Yes, we offer customized logo for any type.
4. What's the payment method?
TT 30% as Deposit, Balance Before shipment by TT or L/C at sight.
Why US?
1- Since 1995, With over 20yrs experience;
2- 2 Years Guarantee for all the the beam of trailers;
3- Reliability, Safety and Economic Transport solutions;
4- Custom Production according to demand;
5- Strict quality control, out-standing quality assurance;
6- Stock Trailers and immediate delivery;
7- After-sale service available, Email will be reply within 8 hours.
Our Advantages
1- With well experienced semi trailer production company to offer high quality and competitive prices semi trailer to our worldwide valuable customers.
2- An professional team which is experienced with international market and has strong technical capability to customized cost effective.
3- Sell well in the international markets, such as African market ( Sudan, Angola, Zimbabwe, Liberia, Djibouti, Congo, Kenya, Ghana ect.), Middle East, South Asia and South-America market.
4- 2 Years Guarantee for all the the beam of trailers, timely shipment.
Quality Control
1- For Each trailer, we should do the testing and inspect the quality.
2- We give inspection certificate according to customer demand for every trailer which given by an independent third party certification company
3- We provide out-standing quality assurance
4- No any quality complaints for 9 years.
Perfect Service & Support
1- Whenever reliability, safety and economic is needed, there is a a solution. CHHGC provides the best possible quality semi trailers to worldwide valuable customers.
2- With a full range of trailer spate parts support, spare parts supplying within 3 days
3- Seriously consider customer's requirements, and welcome different cooperation mode.
4- Provide professional trailer drawing
5- Considerate after-sales service & product maintenance
Audited Supplier 
){kind=link}
){kind=link}