CCC ISO certificated and transport bulk cargo Flatbed Semi Trailer
Specifications
| Specification of flatbed semi-trailer |
| Item |
Unit |
Quantity |
Notice |
| Size |
|
|
13, 500 mm*2, 440 mm*1, 600 mm
detail according to the drawing |
| Axle |
piece |
3 |
13T BPW or FUWA, air suspension, lifting device or mechanical suspension 10 pieces |
| Tire |
piece |
8 |
Double Coins Brand, 425R22.5 |
| Wheel rim |
piece |
8 |
13.00-22.5zhengxing, domestic |
| Leaf spring |
piece |
8 |
90mm width*10pieces*13mm thickness |
| Braking system |
set |
|
2 line air braking system with air tank, emergency relay valve, braking chambers and mechanical slack adjusters. |
Electrical system |
set |
1 |
24 volt electrical system. 7 pin electrical connector. parking. stop, reverse, number plate and indicator lights. rear lights conform to European standard, rear front and side reflectors |
| Suspension |
set |
3 |
High quality Q700 steel |
| Relay valve |
whole vehicle |
1 |
WABCO |
| Landing gear |
pair |
1 |
JOST 19' A400, Two sides operation |
| Kingpin 2.0" |
piece |
1 |
JOST50# |
| Tie-in |
piece |
2 |
Haldex |
| Chamber |
piece |
3 |
T30/30 types on all axles |
| Upper and lower wing plates |
|
|
12/12mm, width146mm,
Using the highly quality Q700L |
| Main beam |
|
|
Height: 500mm Web plate: 8mm
Using the highly quality Q700L steel |
| Side beam |
|
|
16U shaped steel |
| Floor |
|
|
3mm checkered plate |
| Cross beam |
|
|
80*40 square tube |
| Tool box |
piece |
1 |
1000mm standard, on the right side |
| Reflectors |
|
|
Red triangle reflectors at the rear of the trailer and on side |
| Shot blasting and paint |
|
|
Chassis is completely shot blasted to SA 2.5 grade, and painted with first layer of international Zinc Epoxy primer
(30 Microns DEF), second layer international high built polyurethane under coat(40 microns DFT), THIRD AND FORTH LAYERS INTERNATIONAL alkyd FINISH TOP coat. total 80-100 microns. Trailer all waxed. |
| Spare tire carrier |
|
2 |
Standard |
| Color |
|
|
RAL 5017 Traffic Blue. |
Characteristics
1. Side member of upper camber structure: As per the mechanical analysis, the unique overall camber structure of the longitudinal beam is adopted to ensure lifetime downward bending-free of crossbeams and effective save fuel consumption under same bearing load and build maximum economic value for users.
2. Sophisticated process: The main parts of the vehicle are fabricated by advanced equipment. The longitudinal beams are welded by imported fully automatic tracking submerged arc welding machine. The wheels and axles are assembled by assembly machine and the wheelbase is guaranteed by distance measuring equipment.
3. Suspension system: The characteristic new suspension system and imported US Holland suspension system feature balanced load among various axles. The tie rod angle of system is reasonably designed to reduce the instant friction between tire and ground and the abnormal tire wear during the frequent operation. The snap rings for shafts are one of integral casting.
4. Axles: The axles choose the quality products manufactured by professional factory, featuring high bearing capacity and difficult deformation. In addition, the optional anti-lock brake system(ABS) from domestic or foreign renowned brand can effectively eliminate the side slip and drifting of vehicle due to locking of wheels in event of emergency braking and improve the driving safety of the vehicle.
5. Light of dead weight: The partial weight reduction is conducted in multiple portions on the premises of guaranteeing the structural strength. While reducing the dead weight, the bearing capacity is effectively guaranteed.
6. Low bearing surface: The optional goose neck structure of beam effectively reduces the height of bearing surface, lowers the gravity center, and improves the transport safety.
7. Humanized design:
→The limiter is added to the spin lock to ensure safer transport;
→The design of spin lock handle features beautiful and elegant and easy operate;
→The operating handle of front enclose spin lock is located within the front enclosure frame, in order to prevent the handle from scratching the accessories of main unit.
→Two positioned three-way valve is added to the brake system to improve the safety of parking brake.
8. Electric system: The electric system adopts the genuine fully sealed harness from domestic renowned brands. The lamps adopt new LED lamp, featuring high illumination intensity and light perception, high mist penetration, stale working performance and long service life.
9. Welding procedure: Frame and top-bottom welding are all compressed tightly with pneumatic-hydraulic clamping, automatic transmission and other large tools welding, effectively control welding deformation and guarantee the smoothness and technical requirements. The turnover model makes the welding strength; The electric tilting system controls the manufacture process spare part distortion. Mixes gas welding ensures the welded joint quality.
10. Painting craft: Using the baking varnish craft, primer twice, top coat twice and detection is made strictly according to the national standard for film thickness to guarantee the paint quality and brightness.
---The main components of the warranty period(See table)
Item Name |
Warranty |
Item Name |
Warranty |
Main Frame
|
Frame |
1 Year |
Running Gear
|
Axle |
3 Months |
Suspension |
3 Months |
Axle Bearing |
3 Months |
King Pin |
1 Year |
Wheel Hub |
3 Months |
Balance Arm |
3 Months |
Tire |
6 Months |
Braking Device
|
Brake Drum |
3 Months |
Support Device
|
Landing Gear |
3 Months |
Brake Chamber |
3 Months |
Spare Wheel Carrier |
3 Months |
Air Reservoir |
3 Months |
|
|
Item Name |
Warranty |
Others
|
Leaf Spring |
3 Months |
Brake Chamber Diaphragm |
3 Months |
Emergency Relay Valve |
3 Months |
Brake Shoe |
3 Months |
Relay Valve |
3 Months |
Our Products
Our Service
1. Professional design model for customers' special requirements.
2. Strict Quality Control.
3. Longer guarantee terms
4. Can receive the large order.
5. Vairous payment methods, such as T/T, L/C, etc.
6. Fast delivery as your requirements.
7. Offer after-sale service and OEM spear-parts.
Package and Shipping
1. Nude Packing 3 sets stacked (by Bulk Cargo Ship, Ro-ro Ship, or Land Transportation);
2. Cut the rear part which can load two sets in one 40ft container;
2. Keep the trailer original but load two sets in one 45ft container.
Workshop
FAQ
1. Can i have samples of this type of trailer to test the quality?
Yes, you can buy any samples to test the quality, our MOQ is 1 set.
2. What's the delivery time and can you lower the price?
It depends on your order. The delivery time is within 15 workdays after we received your prepayment. If you have place an order of large quantities, then, of course, the price can be lowered.
3. Can i customize the painting and the logo?
Yes, we offer customized logo for any type.
4. What's the payment method?
TT 30% as Deposit, Balance Before shipment by TT or L/C at sight.
Why us?
1- Since 1995, With over 20yrs experience;
2- 2 Years Guarantee for all the the beam of trailers;
3- Reliability, Safety and Economic Transport solutions;
4- Custom Production according to demand;
5- Strict quality control, out-standing quality assurance;
6- Stock Trailers and immediate delivery;
7- After-sale service available, Email will be reply within 8 hours.
Our Advantages
1- With well experienced semi trailer production company to offer high quality and competitive prices semi trailer to our worldwide valuable customers.
2- An professional team which is experienced with international market and has strong technical capability to customized cost effective.
3- Sell well in the international markets, such as African market ( Sudan, Angola, Zimbabwe, Liberia, Djibouti, Congo, Kenya, Ghana ect. ), Middle East, South Asia and South-America market.
4- 2 Years Guarantee for all the the beam of trailers, timely shipment.
Quality Control
1- For Each trailer, we should do the testing and inspect the quality.
2- We give inspection certificate according to customer demand for every trailer which given by an independent third party certification company
3- We provide out-standing quality assurance
4- No any quality complaints for 9 years.
Perfect Service & Support
1- Whenever reliability, safety and economic is needed, there is a a solution. TITAN provides the best possible quality semi trailers to worldwide valuable customers.
2- With a full range of trailer spate parts support, spare parts supplying within 3 days
3- Seriously consider customer's requirements, and welcome different cooperation mode.
4- Provide professional trailer drawing
5- Considerate after-sales service & product maintenance
Feel free to contact and looking forward to your visiting factory.
Audited Supplier 
){kind=link}
){kind=link}