ISO CCC Approved 3 Axles 33t Box Truck Semi Trailer, Coal Transport Van Semi Trailer

• Customization: Available
• After-sales Service: 1 Year
• Type: Semi-Trailer
• Model NO.: ZCZ9404CCYHJC
• Load Capacity: 30T
• Certification: ISO9001, ISO/TS16949, ISO/Ts16949, ISO, CCC, SGS
• Shape: Van-type
• Axle Number: 3
• Tire Number: 12
• Material: Steel
• Condition: New
• Height of Longitudinal Beam: 500mm
• Specification of Upper/Lower Wing Plates: 10/12mm
• Longitudinal Beam Web: T5
• Specification of Side Beam: 14# Profile Steel
• Thickness of Baseplate: T2
• Specification of Throughout Beam: W-Shaped Throughout Beam
• Spacing of Throughout Beam: Approximate 650
• Type of Body Panel: Small Vertical
• Width of Pillars: 180mm
• Specification and Number of Toolkit: One 2.5m Toolkit
• Transport Package: Sea Water-Proof Paint
• Specification: 13*2.5*0.6
• Origin: Henan Province, China
• HS Code: 8716399000
• Production Capacity: 70000 Units/Year

Product Description

ISO CCC Approved 3 Axles 33T Box Truck Semi Trailer, Coal Transport Van Semi Trailer


Configuration

**The van box: Wide vertical van plate, double-door with block bar
**Frame: Main beam: 500mm(height)
**upper/down wing plates: 16/20mm (thickness)
**Middle plate: 10mm (thickness)
**side beam: 20# channel Steel
**platform plate: 4mm
**throughout beam: 14# channel Steel
**traction pin: 90#
**landing leg: 28-tons single-acting
**tool box: 2.5m/ 1 piece
**three pair of double-door on left and right side, three block bars on each door.
**one pair of double-door on rear side, two block bars on each door.
**cross braces in the van
**gooseneck for option
**suspension: 16Tons
**tire: 12.00R20 /12pieces
**wheel rim: 8.5/ 12pieces
**stored seperated pump: 2 pieces
**4s/2M ABS(made in china)
**Spare tyre carrier: 2 pieces


Features:

To adapt to the transport environment of the overload and overrun control and charging by weight and meet the user's demands for the "lighter" vehicle dead weight, higher load bearing, and maximum single-journey profit, the top quality model with multiple characteristic advantages and building of outstanding value is built through elaborate design, repeated tests, and fine fabrication.

1. Convex-concave throughout beam: National patented product(national patent number: 200610062813.9), featuring light dead weight and high strength.

2. Light dead weight: On the basis of light semi-trailer. The critical parts are further optimized to ensure weight of whole vehicle and realize "Lightweight" of vehicle.

3. High Bearing capacity: The reduction of dead weight, instead of load bearing capacity, maintains good load bearing capacity and realize economic concept of high bearing capacity and high-speed operation.

4. Low bearing surface: The optional small gooseneck and small 4-longitudinal beam structure effectively reduces the height of bearing surface, lowers the gravity center, and improves the transport safety.


Specifications
 

Item number	ZCZ9404CCYHJC	Batch	237
Trade Mark	CHHGC	Product name	Van semi trailer
Rated Weight	33000,32500	Total Weight	39950
Curb Weight	6950,7450	Fuel Type
Emission standard		Number of the Axles	3
Wheelbase	6680+1310+1310,7180+1310+1310	Axle load	-/23950(three axles installed side by side)
The spring number	-/4/4/4,-/10/10/10,-/-/-/-	Tyre Number	12
Tyre Size	12R22.5 12PR,11R22.5 12PR,  11.00R20 12PR	Approach/Departure Angle	-/15,-/15
Front/Rear overhang(mm)	-/2300,-/2300	Front tread	-
Rear wheel base	1840/1840/1840, 1820/1820/1820
The overall length	13000	The overall width	2500
The overall Height	3750,3550,3350,3150	The van length	12840
The van width	2330,2300	The van height	600
Max payload of the saddle	16000	The company	CHHGC
Basic Configuration table of Five Typical products ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Type	Ultra-Light Type	Light Type	Standard Type	Heavy Type	Ultra-Heavy Type
Ovall dimensions(m)(L*w*h)	13*2.5*1.8	13*2.5*1.8	13*2.5*1.8	13*2.5*1.8	13*2.5*1.8
Height of longitudinal beam	500	500	500	500	500
Specification of upper/lower wing plates	10/12	12/14	14/16	16/16	16/20
Longitudinal beam web	T5	T6	T6	T8	T10
Specification of side beam	14# profile steel	14# profile steel	16# channel steel	18# channel steel	20# channel steel
Thickness of baseplate	T2	T2	T3	T3	T4
Specification of throughout beam	W-shaped throughout beam	W-shaped throughout beam	Rectangular tube 80*40	Rectangular tube 80*40	10# channel steel
Spacing of throughout beam	Approximate 650	Approximate 650	Approximate 650	Approximate 650	Approximate 650
Type of body panel	small vertical	small vertical	small vertical	large vertical	large vertical
Width of pillars	180	180	180	220	220
Specification and number of toolkit	one 2.5m toolkit	one 2.5m toolkit	one 2.5 toolkit	one 2.5 toolkit	one 2.5 toolkit
Specification of leaf spring	10-plate type I	10-plate type I	10-plate type II	12-plate type I	12-plate type II
Specification of traction pin	50#	50#	90#	90#	90#
Support leg	8-tonnage single-acting	8-tonnage single-acting	28-tonnage single-acting	28-tonnage single-acting	28-tonnage single-acting
Diameter of balance arm pin	50mm	50mm	50mm	50mm	75mm
Uniform bearing Ton	Below 40 Tons	Below 50 Tons	Below 60 Tons	Below 70 Tons	Below 80 Tons
Curb weight	Approximate 7.3 Tons	Approximate 7.5 Tons	Approximate 8.9 Tons	Approximate 9.4 Tons	Approximate 10.7 Tons
Specification of fence	Integral front body. The pillars are integral and are 1.8m high, the railing is1.2m high,  and the structure of rear body is same with side body. the spacing between two layers of railings and between the railing and fence is 100mm  and the spacing is approximate 300mm at the railing support . the lower fence opens downward, the first section of upper railing opens rearward ,  and the other are hinged opening. the spacing is nonadjustable 100mm between railing and fence and at the railing support,  the total height of fence + railing is above 1.2m (excluding 1.2m),  the tubular movable straight tension brace is added between two pillars. There is no roof or front/rear body arc panel.

Our Products


Workshop



FAQ:

1. Can i have samples of this type of trailer to test the quality?
Yes, you can buy any samples to test the quality,our MOQ is 1 set.

2. What's the delivery time and can you lower the price?
It depends on your order. The delivery time is within 15 workdays after we received your prepayment. If you have place an order of large quantities, then ,of course, the price can be lowered.

3. Can i customize the painting and the logo?
Yes, we offer customized logo for any type.

4. What's the payment method?
TT 30% as Deposit, Balance Before shipment by TT or L/C at sight.


Why US?

1- Since 1995, With over 20yrs experience
2- 2 Years Guarantee for all the the beam of trailers
3- Reliability, Safety and Economic Transport solutions.
4- Custom Production according to demand
5- Strict quality control, out-standing quality assurance
6- Stock Trailers and immediate delivery
7- After-sale service available, Email will be reply within 8 hours.


Our Advantages

1- With well experienced semi trailer production company to offer high quality and competitive prices semi trailer to our worldwide valuable customers.
2- An professional team which is experienced with international market and has strong technical capability to customized cost effective.
3- Sell well in the international markets, such as African market ( Sudan, Angola, Zimbabwe, Liberia, Djibouti, Congo, Kenya, Ghana ect.), Middle East, South Asia and South-America market.
4- 2 Years Guarantee for all the the beam of trailers, timely shipment.


Quality Control

1- For Each trailer, we should do the testing and inspect the quality.
2- We give inspection certificate according to customer demand for every trailer which given by an independent third party certification company.
3- We provide out-standing quality assurance.
4- No any quality complaints for 9 years. 


Perfect Service & Support

1- Whenever reliability, safety and economic is needed, there is a a solution. TITAN provides the best possible quality semi trailers to worldwide valuable customers.
2- With a full range of trailer spate parts support, spare parts supplying within 3 days.
3- Seriously consider customer's requirements, and welcome different cooperation mode.
4- Provide professional trailer drawing.
5- Considerate after-sales service & product maintenance.
Feel free to contact and looking forward to your visiting factory.