PRODUCT PARAMETER
LSNE-3000 nanoscale electrostatic spinning machine is a kind
of polymer or melt jet spinning in strong electric field by using
high voltage electricity, and finally get nanoscale diameter
polymer filament. The nanofiber membrane has been widely
used in biomedicine, filter, composite sensor and other fields.
(1) High voltage power supply 0~21kV, digital display, overcurrent protection, overvoltage protection;
(2) The double nozzle system is located on both sides of the drum collector, using medical needles, needles of
different diameters can be replaced, through the needle of different diameters and the parameter setting of the
metering pump, the composite fiber film of different components can be obtained, to meet the requirements of
different experiments;
(3) Two channel metering pump: continuous metering pump, easy to use, digital display, flow speed, injection
volume can be accurately controlled. Two channels can be independently controlled to set different advancing
speeds, and can be used with different specifications of syringes;
(4) Drum collector: Copper drum speed 0~3000 rpm, accurate adjustable and integrated forming, stable running
without shaking.
The instrument is equipped with high voltage power supply, dual nozzle system and drum collector, nozzle and
collector association system, independent control of metering pump, nozzle and collector parameters are
controlled by the control system, parameters can be adjusted to meet the needs of different experiments. It can
be used to prepare microfibers with a diameter of tens of nanometers, which have very high specific surface area,
ultra-fine diameter and extremely high porosity. Nanofibers can be prepared from a variety of polymers, such as
PVA, PVP, PAN and PS, as well as polymers doped with other metal ions.
Project
content
Dual sprinkler system
The double nozzle is located on both sides of the drum collector, using
medical needles, needles of different diameters can be replaced, through the
needle of different diameters and the parameter setting of the metering
pump, the composite fiber film of different components can be obtained, to
meet the requirements of different experiments;
Two channel metering pump: continuous metering pump, easy to use, digital
display, flow speed, injection volume can be accurately controlled. The two
channels can be independently controlled to set different advancing speeds,
and can be used with different specifications of syringes.
Standard syringe
diameter
0.7 mm
Injection pump standard
needle volume
5 mL
High voltage power supply
0-21 kV,Digital display, over current protection, over voltage protection
Collecting cylinder speed
Copper drum speed 0-3000 rpm, accurate adjustable and integrated forming,
stable operation
Product size
80 cm*69 cm*69 cm
Audited Supplier 
){kind=link}
){kind=link}