6X4 Sinotruck Intelligent Automatic Gull-Wing/Wingspan Type Top Cover Dump Truck Tipping Truck
| Overall Dimension(L*W*H) |
8145*2496*3386 |
| Model Number |
HH3318A12 |
| Brand Name |
CHHGC |
| Place of Origin |
China (Mainland) |
| Gross Vehicle Weight |
25000 |
| Engine Capacity |
> 8L |
| Fuel Type |
Diesel |
| Emission Standard |
Euro 3 |
| Transmission Type |
Manual |
*Configuration:
| Engine |
DCi385-40 |
| Transmission shaft |
EQ1118GAY |
| Steering |
ZF8098 |
| Gearbox |
16JSD168TA |
| Torque |
1800N/M |
| Tyres |
12.00-20 |
| Cargo dimensions |
5600x2300x1500 |
| Cubage |
30m3 |
| Steel thickness of carriage |
floor:8;side:6 |
| Hydraulic lift of carriage |
middle/front lift |
Materials
The steel plates adopt the quality materials from domestic large steel works to guarantee the material performance, with plus thickness deviation and sufficient thickness.
Ility and safety guarantee.
Parts
Five major hydraulic adopt the specially customizes products from domestic renowned brands and the sealing units adopt the products from world's renowned brands, featuring durab
Production
There are many highly skilled personnel, the critical quality points are operated by professionally experienced senior technicians mand all operators are trained before assuming working post. The streamline and standardized operations and fine techniques guarantee the quality.
Appearance
All parts are shot blasted, all assemblies are painted before assembly, and the body plates are acid picked and phosphating treated to greatly improve paint adhesion and ensure shining and lasting paint
*Characteristic structure
Subframe structure
The subframe od the central-positioned dump truck is formed by snap-fit from high strength steel t ensure effectively the strength. The lower hinged joint for cylinder and tension arm is of integral structure to prevent the deviation.
Rear body structure
The rear body adopts fully welded horizontal and vertical ribs and triangular box is added depending on the regional characteristics to effectively improve the impact resistance of the rear body.
Door operating mechanism
This mechanism is in multiple types, including tie rod type, steel hinge type, pneumatically operated type, and hydraulically operated type.
Lifting alarm
The alarm will buzz while the vehicle is being lifted, in order to eliminate potential safety hazard.
Baseplate damping structure
The new two-layer baseplate with rubber cushion in the middle is adopted to damp the impact force onto the baseplate by means of the damping function of rubber, which effectively improve the service life and practicability of the whole vehicle.
Anti-adhesion structure of dump body
For the dump trucks for transport of wet and sticky cargo, the adhesion of cargo and low dumping rate will lead to extremely low operation efficiency. We developed one synthetic resin plate with good slipping performance, which is assed to the four walls and baseplate of the dump body to effectively improve the adhesion symptom of cargo and promote the transport efficiency.
Exhaust gas recirculation device
The specially designed dumb body heater by engine exhaust gas, which not only effectively reduces the air contamination of the exhaust emission, but also sufficiently meets the winter construction and transport demands in cold regions by means of heating of sump body.
Double hinged hook seat
It effectively prevents the damage of rear body due to collision between rear body and the ground while the dump body is being lifted, in order to maximize the opening of the rear body gate.
1.The steel material f the superstructure is completely upgraded to mangannese steel and 610L steel;
2.Widened and thickened pillars and ribs;
3.The longitudinal beams of the frame sufficiently utilized the height;
4.Wide tail+middle balance stand structure;
5.Powerful pump and large pipes of hydraulic system;
6.Ultra-large cast steel lock hook+manual hook of the rear body;
7.The thickened channel steel of rear body+full welds;
8.The subframe adopts rectangular tube logidinal beams;
9.The tilting seat adopts enlarged and thickened cast steel part to realize stable and smoth lifting;
10.Safety,energy-saving,high efficiency,elegance,practicabilty and environmant-friendly.
Workshop
){kind=link}