Basic information:
Model number VF330
Detector Type: Refrigerated detector
Resolution: 320x256
The pixel spacing is 30μm
Wavelength range 2~3.5μm
Image frame rate 50/60Hz
Gas detection sensitivity 0.001ml/s
Thermal sensitivity (NETD) ≤15mK@30ºC
Standard lens Field of view (FOV) 18°x14.5°
Standard lens spatial resolution (IFOV) 1mrad
Digital zoom standard with 1~8 times continuous digital zoom; Zoom multiples can be customized
Focusing mode Manual/electric/automatic
Lens recognition
Image display
Display automatic
5.0" touch screen
Digital camera 5 million visible light pixels, LED fill light; High pixel visible light modules can be customized
The viewfinder has an OLED screen
Image mode Infrared image, high sensitivity, visible image, etc. More modes can be customized
Color palette Standard with 12 kinds of color palettes (color palette type, quantity can be customized)
Image enhancement
Image adjustment automatic/manual
Detectable gas
Measurement and analysis
Temperature range Methane, ethane, propane, butane, ethylene, propylene, benzene, ethanol, ethylbenzene, heptane,
Hexane, isopentylene, methanol, MEK, MIBK, octane, pentane, 1-pentene, toluene, xylene, etc
Standard -20°C~+350°C, temperature range can be customized
The temperature measurement accuracy is ±2ºC or ±2%
Point temperature measurement standard with 20 movable points temperature measurement; The number of point measurements can be customized
Line temperature measurement standard with 20 moving line temperature measurement, including maximum/minimum/average value; The quantity of line temperature measurement can be customized
Area temperature measurement standard with 20 movable area temperature measurement (input box or circle), including maximum/minimum/average value; The number of regional temperature measurements can be customized
Temperature measurement mode The highest temperature, the lowest temperature capture, average temperature measurement, temperature alarm (sound, color)
Temperature correction
Image storage
Image viewing emittance, background temperature, atmospheric transmittance correction
Image preview in thumbnail view navigation
Storage medium standard 64G memory card; expandable
Image format
Image annotation
Sound annotation standard JPEG, including measurement data
Standard 60-second voice recording (duration can be customized), stored with the image; Video with voice
GPS
Video recording and transmission
Radiant infrared video recording support, automatic GPS image marking
Real-time infrared video recording
Non-radiative infrared video recording/visible video recording H.264 stored in memory card
Radiant infrared video transmission support, via UVC or WiFi
Non-radiative infrared video transmission H.264 or MPEG-4 over WiFi; MJPEG is transmitted via UVC or WiFi
APP function
port
The transmission interface is connected to the explosion-proof hand operator through WiFi, which can realize the data communication with the spectral education LDAR management platform; Remote monitoring can also be achieved by explosion-proof hand operator
USB, HDMI, Memory card, WiFi
Audio integrated microphone and speaker for voice annotation
Video output HDMI port
USB interface to transmit full radiation thermal image video stream to PC; Read the flash data inside the thermal camera: read the memory card data
WiFi standard :802.11b/g, frequency range :2412-2462MHz, maximum output power :15dBm
Laser ranging module has
antenna
Power supply system
Battery type built-in
Rechargeable lithium battery, charger (with charge indicator)
Battery operating time When the ambient temperature is 25C, the continuous operating time is greater than 3.5 hours
The battery charging time is 2.5h, 90% of the charge is full, and the charging status is indicated by the LED light
Start time ≤6 minutes
Operating temperature -20ºC~+60ºC
Storage temperature
Environmental parameter
Operating temperature range -40ºC~+70ºC
15 ºC to + 50 ºC
Storage temperature range -40 ° C to +70 ° C
Humidity (working and storage) IEC60068-2-30/24 hours, 95% relative humidity +25ºC to +40ºC/2 cycles
Encapsulated IP 54 (IEC 60529)
Impact resistance 25g (IEC 60068-2-29
industry application
FAQ
Q1 Are you a manufacturer?
A1: Yes, we are a profeesional manufacturer.
Q2 What is your terms of payment ?
A3: Payment should be T/T 100% in advance before shippment.
If you have another question, pls don't hesitate to contact me in your free time!
Q3 Do you offer quality assurance ?
A4: Yes. We have professional QC for checking each item to make sure all you get are in good condition. If there is any item with non-artificial damage, we can do exchange for you within half year after you send back the item to us. Meanwhile, we will pay for the shipping of sending replacement to you and you will need to pay for the shipping of sending back.
Q4 Can I visit your company and factory in China?
A5: Sure. We are more than happy to receive you in Zhengzhou and show you around our workplace. If you need more information about our products, please don't hesitate to contact us!
Audited Supplier 
){kind=link}
){kind=link}