| Load Capacity: | 8T |
|---|---|
| Certification: | ISO9001, CCC, ISO/TS16949 |
| Wheel Base: | 8000-9000mm |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | 3 axle 40FT container semi-trailer | |||
| item | unit | quantity | notice |
| overall dimension | 12380length*2500width*1520height, detail according to the drawing |
||
| axle | piece | 3 | 13T standard |
| tyre | piece | 12 | 11R20-16PR |
| rim | piece | 12 | 8.0-20 |
| leaf spring | piece | 6 | 90width*10pieces*13 thickness |
| braking system | set | 2 line air braking system with air tank ,emergency relay valve,braking chambers and mechanical slack adjusters. | |
electrical system |
set | 1 | 24 volt electrical system.7 pin electrical connector.parking .stop,reverse,number plate and indicator lights.rear lights conform to European standard,rear front and side reflectors |
| suspension | set | 3 | Our standard Suspension |
| relay valve | whole vehicle | 1 | domestic brand |
| landing gear | pair | 1 | 19'' FUWA |
| kingpin 2" | piece | 1 | 50# welded type |
| tie-in | piece | 2 | haldex |
| chamber | piece | 2 | stored chamber 2 units T30/30 |
| upper and lower wing plates | 14/16mm,width146mm, using the highly quality Q345 steel, |
||
| twist locks | 8 | can load 1*40',2*20' containers | |
| main beam | height: 500mm webplate:6mm using the highly quality Q345 steel |
||
| reflectors | Red triangle reflectors at the rear of the trailer and on side | ||
| Shotblasting and paint | Chassis is comletely shor blasted to SA 2.5 grade,and painted with first layer of international Zinc Epoxy primer(30 Microns DEF),second layer international high built polyurethane under coat(40 microns DFT),THIRD AND FORTH LAYERS INTERNATIONAL alkyd FINISH TOP coat.total 80-100 microns. | ||
| spare tyre carrier | 2 | standard | |
| color | according to required on customer | ||
| payment terms | 30% TT in advance,the balance should be paid 10 days prior to the delivery time | ||
delivery date |
15 working days after the deposit and the confirmation of the drawing. | ||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}